NSN 5985-01-162-6373
Part Details | VARIABLE ATTENUATOR
5985-01-162-6373 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).
Alternate Parts: 581420A1A, 5814-20A-1A, 150320002, 1503-20-002, 2012366846, 20-1236684-6, 5985-01-162-6373, 01-162-6373, 5985011626373, 011626373
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | SEP 21, 1983 | 01-162-6373 | 00838 ( ATTENUATOR, VARIABLE ) |
REFERENCE DRAWINGS & PICTURES
IRREGULAR
Cross Reference | NSN 5985-01-162-6373
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 5814-20A-1A | 09992 | ARRA INC |
| 1503-20-002 | 34078 | CINCH CONNECTIVITY SOLUTIONS, INC. |
| 20-1236684-6 | 07397 | GENERAL DYNAMICS ADVANCEDINFORMATION SYSTEMS INC. |
Technical Data | NSN 5985-01-162-6373
| Characteristic | Specifications |
|---|---|
| APPLICATION DESIGN | TRANSMISSION LINE |
| FREQUENCY RANGE | 4.000 GIGAHERTZ MINIMUM AND 8.000 GIGAHERTZ MAXIMUM |
| VOLTAGE STANDING WAVE RATIO | 1.50 |
| OVERALL ATTENUATION RANGE IN DECIBELS | P0.0/P20.0 |
| OVERALL ATTENUATION ACCURACY IN DECIBELS | M3.00/P3.00 |
| ATTENUATION VARIATION METHOD | CONTINUOUS |
| BODY STYLE | IRREGULAR |
| OVERALL LENGTH | 2.500 INCHES NOMINAL |
| OVERALL HEIGHT | 0.500 INCHES NOMINAL |
| OVERALL WIDTH | 2.000 INCHES NOMINAL |
| ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 SHAFT |
| SHAFT TYPE | ROUND, SLOTTED |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| SHAFT LENGTH | 0.500 INCHES NOMINAL |
| TERMINAL TYPE AND QUANTITY | 2 CONNECTOR, COAXIAL, FEMALE |
| COAXIAL CONNECTOR SERIES DESIGNATION | SMA |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.112 INCHES |
| MOUNTING THREAD QUANTITY | 40 PER INCH |
| MOUNTING FACILITY PATTERN | FOUR POSITION RECTANGULAR |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.044 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.093 INCHES NOMINAL |