NSN 5985-01-187-0799
Part Details | VARIABLE ATTENUATOR
5985-01-187-0799 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).
Alternate Parts: 9401146, 940-114-6, 5985-01-187-0799, 01-187-0799, 5985011870799, 011870799
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | AUG 17, 1984 | 01-187-0799 | 00838 ( ATTENUATOR, VARIABLE ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 5985-01-187-0799
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 940-114-6 | 93459 | API / WEINSCHEL, INC. |
Technical Data | NSN 5985-01-187-0799
| Characteristic | Specifications |
|---|---|
| APPLICATION DESIGN | TRANSMISSION LINE |
| FREQUENCY RANGE | 0.000 HERTZ MINIMUM AND 2.000 GIGAHERTZ MAXIMUM |
| IMPEDANCE RATING IN OHMS | 50.0 INPUT-OUTPUT |
| VOLTAGE STANDING WAVE RATIO | B1.50$$B1.60 |
| POWER RATING | 5.0 WATTS AVERAGE AND 500.0 WATTS PEAK |
| INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS | 6.0 |
| OVERALL ATTENUATION RANGE IN DECIBELS | P0.0/P114.0 |
| OVERALL ATTENUATION ACCURACY IN DECIBELS | M0.25/P0.25 |
| ATTENUATION ACCURACY REFERENCE FREQUENCY | 1.0 GIGAHERTZ |
| ATTENUATION VARIATION METHOD | CONTINUOUS |
| OVERALL HEIGHT | 4.520 INCHES NOMINAL |
| OVERALL WIDTH | 4.520 INCHES NOMINAL |
| ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 KNOB W/DIAL |
| TERMINAL TYPE AND QUANTITY | 2 CONNECTOR, COAXIAL, FEMALE |
| COAXIAL CONNECTOR SERIES DESIGNATION | WPM |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| MOUNTING FACILITY PATTERN | FOUR POSITION RECTANGULAR |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.154 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 3.500 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 3.500 INCHES NOMINAL |