NSN 5985-01-415-1465
Part Details | VARIABLE ATTENUATOR
5985-01-415-1465 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).
Alternate Parts: AGH1020D005, AGH-1020D-005, 5985-01-415-1465, 01-415-1465, 5985014151465, 014151465
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JUN 21, 1995 | 01-415-1465 | 00838 ( ATTENUATOR, VARIABLE ) |
REFERENCE DRAWINGS & PICTURES
COAXIAL TYPE
Cross Reference | NSN 5985-01-415-1465
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| AGH-1020D-005 | 60483 | AMERICAN MICROWAVE CORPORATION |
Technical Data | NSN 5985-01-415-1465
| Characteristic | Specifications |
|---|---|
| APPLICATION DESIGN | TRANSMISSION LINE |
| FREQUENCY RANGE | 0.750 GIGAHERTZ MINIMUM AND 2.250 GIGAHERTZ MAXIMUM |
| IMPEDANCE RATING IN OHMS | 10000.0 INPUT |
| VOLTAGE STANDING WAVE RATIO | 2.00 |
| INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS | 1.4 |
| OVERALL ATTENUATION RANGE IN DECIBELS | P0.0/P60.0 |
| ATTENUATION VARIATION METHOD | CONTINUOUS |
| BODY STYLE | COAXIAL TYPE |
| OVERALL LENGTH | 3.260 INCHES NOMINAL |
| OVERALL HEIGHT | 2.000 INCHES NOMINAL |
| OVERALL WIDTH | 0.500 INCHES NOMINAL |
| ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 ELECTRONIC, VOLTAGE CONTROLLED |
| TERMINAL TYPE AND QUANTITY | 2 CONNECTOR, COAXIAL, FEMALE AND 4 PIN |
| COAXIAL CONNECTOR SERIES DESIGNATION | SMA |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE |
| MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.130 INCHES |
| MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.130 INCHES NOMINAL |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 2.350 INCHES NOMINAL |