NSN 5999-01-368-5102
Part Details | ELECTRICAL-ELECTRONIC COMPONENT MOUNTING PAD
5999-01-368-5102 An item fabricated from electrically nonconductive material specifically designed to provide a support for mounting an electrical and/or an electronic component such as a semiconductor device, relay, or resistor into the next higher assembly. It isolates the component from the mounting surface of the next higher assembly, it may act as a strain relief to avoid damage to the component seal, and it may permit soldering of the component to the next higher assembly without damage. It includes holes, notches, or other provisions for physical alignment and spacing of electrical leads and/or other mounting facilities projecting from the component it mounts. It may also afford protection from shock or vibration. It may be either nonthermally conductive which protects the component from temperature changes in the next higher assembly or it may be thermally conductive which permits heat generated in the component to be drained out to a heat sink. For items whose function is electrical insulation only, see INSULATOR, (as modified). Excludes HOLDER, (as modified); RETAINER, (as modified), and SPACER, PLATE.
Alternate Parts: M38527706D, M38527/7-06D, MILM385277, MIL-M-38527/7, 5999-01-368-5102, 01-368-5102, 5999013685102, 013685102
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | DEC 03, 1992 | 01-368-5102 | 61934 ( MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT ) |
REFERENCE DRAWINGS & PICTURES
STRIP
Cross Reference | NSN 5999-01-368-5102
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| M38527/7-06D | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MIL-M-38527/7 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 5999-01-368-5102
| Characteristic | Specifications |
|---|---|
| BODY STYLE | STRIP |
| OVERALL LENGTH | 1.585 INCHES NOMINAL |
| OVERALL HEIGHT | 0.100 INCHES NOMINAL |
| OVERALL WIDTH | 0.545 INCHES NOMINAL |
| COLOR | NATURAL |
| MATERIAL | PLASTIC DIALLYL PHTHALATE |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14 MIL SPEC SINGLE MATERIAL RESPONSE |
| ACCOMMODATED DEVICE MOUNTING HOLE QUANTITY | 2 |
| TEST DATA DOCUMENT | 81349-MIL-M-38527 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-M-38527 TO 7 GOVERNMENT SPECIFICATION |
| END ITEM IDENTIFICATION | 3610-01-233-8507 |