NSN 9390-00-514-5013
Part Details | NONMETALLIC CHANNEL
9390-00-514-5013 A structural shape fabricated from nonmetallic material(s) having two vertical flanges that extend in the same direction from each end of a horizontal base. The vertical flanges may have various type tips and additional flanges which extend on the same plane as the base. It may have a reinforcing agent(s) and backing Excludes SEAL, NONMETALLIC CHANNEL.
Alternate Parts: MILR6855, MIL-R-6855, S626, 9390-00-514-5013, 00-514-5013, 9390005145013, 005145013
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 93 | JAN 01, 1963 | 00-514-5013 | 30218 ( NONMETALLIC CHANNEL ) |
REFERENCE DRAWINGS & PICTURES
OPEN CHANNEL
LEFT INSIDE TAPER W/OUTSIDE RADIUS
RIGHT INSIDE TAPER W/OUTSIDE RADIUS
Cross Reference | NSN 9390-00-514-5013
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| MIL-R-6855 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| S626 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATIONDIV MISSION SYSTEMS |
Technical Data | NSN 9390-00-514-5013
| Characteristic | Specifications |
|---|---|
| CROSS-SECTIONAL SHAPE STYLE | OPEN CHANNEL |
| OVERALL HEIGHT | 0.563 INCHES NOMINAL |
| OVERALL WIDTH | 0.156 INCHES NOMINAL |
| RIGHT SIDE FLANGE HEIGHT | 0.563 INCHES NOMINAL |
| LEFT SIDE FLANGE THICKNESS | 0.063 INCHES NOMINAL |
| RIGHT SIDE FLANGE THICKNESS | 0.063 INCHES NOMINAL |
| FILLET RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE | 0.031 INCHES NOMINAL |
| OUTER RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE | 0.031 INCHES NOMINAL |
| BASE FLANGE THICKNESS | 0.125 INCHES NOMINAL |
| OUTER RADIUS WHERE RIGHT FLANGE JOINS BASE FLANGE | 0.031 INCHES NOMINAL |
| FILLET RADIUS WHERE RIGHT FLANGE JOINS BASE FLANGE | 0.031 INCHES NOMINAL |
| LEFT-SIDE FLANGE TIP STYLE | 1 LEFT INSIDE TAPER W/OUTSIDE RADIUS |
| RIGHT-SIDE FLANGE TIP STYLE | 1 RIGHT INSIDE TAPER W/OUTSIDE RADIUS |
| MATERIAL | RUBBER SYNTHETIC |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-6855, CLASS 1, GRADE 60 MIL SPEC SINGLE MATERIAL RESPONSE |
| NONMETALLIC HARDNESS RATING | 55.0 MINIMUM SHORE DUROMETER A AND 65.0 MAXIMUM SHORE DUROMETER A |
| MINIMUM TENSILE STRENGTH | 1300 POUNDS PER SQUARE INCH |
| TEMP RATING | 100.0 DEG FAHRENHEIT |
| ENVIRONMENTAL PROTECTION | PETROLEUM AND FUEL RESISTANT AND LOW TEMPERATURE |
| NONDEFINITIVE SPEC/STD DATA | 1 CLASS AND EXTRUDEDSHAPE FORM AND 60 GRADE |