NSN 9390-00-640-9778
Part Details | NONMETALLIC CHANNEL
9390-00-640-9778 A structural shape fabricated from nonmetallic material(s) having two vertical flanges that extend in the same direction from each end of a horizontal base. The vertical flanges may have various type tips and additional flanges which extend on the same plane as the base. It may have a reinforcing agent(s) and backing Excludes SEAL, NONMETALLIC CHANNEL.
Alternate Parts: S177469N6, S177469N6, MILR6855, MIL-R-6855, 9390-00-640-9778, 00-640-9778, 9390006409778, 006409778
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 93 | JAN 01, 1963 | 00-640-9778 | 30218 ( NONMETALLIC CHANNEL ) |
REFERENCE DRAWINGS & PICTURES
OPEN CHANNEL
LEFT INSIDE TAPER W/OUTSIDE RADIUS
RIGHT INSIDE TAPER W/OUTSIDE RADIUS
Cross Reference | NSN 9390-00-640-9778
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| S177469N6 | 88277 | BOEING COMPANY, THEDBA BOEING |
| S177469N6 | 18355 | BOEING COMPANY, THEDBA BOEING |
| MIL-R-6855 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 9390-00-640-9778
| Characteristic | Specifications |
|---|---|
| CROSS-SECTIONAL SHAPE STYLE | OPEN CHANNEL |
| OVERALL HEIGHT | 0.281 INCHES NOMINAL |
| OVERALL WIDTH | 0.218 INCHES NOMINAL |
| RIGHT SIDE FLANGE HEIGHT | 0.281 INCHES NOMINAL |
| LEFT SIDE FLANGE THICKNESS | 0.062 INCHES NOMINAL |
| RIGHT SIDE FLANGE THICKNESS | 0.062 INCHES NOMINAL |
| FILLET RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE | 0.031 INCHES NOMINAL |
| OUTER RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE | 0.031 INCHES NOMINAL |
| BASE FLANGE THICKNESS | 0.062 INCHES NOMINAL |
| OUTER RADIUS WHERE RIGHT FLANGE JOINS BASE FLANGE | 0.031 INCHES NOMINAL |
| FILLET RADIUS WHERE RIGHT FLANGE JOINS BASE FLANGE | 0.031 INCHES NOMINAL |
| LEFT-SIDE FLANGE TIP STYLE | 1 LEFT INSIDE TAPER W/OUTSIDE RADIUS |
| RIGHT-SIDE FLANGE TIP STYLE | 1 RIGHT INSIDE TAPER W/OUTSIDE RADIUS |
| MATERIAL | RUBBER SYNTHETIC |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-6855, CLASS 2, TYPE A, GRADE 60 MIL SPEC SINGLE MATERIAL RESPONSE |
| NONMETALLIC HARDNESS RATING | 55.0 MINIMUM SHORE DUROMETER A AND 65.0 MAXIMUM SHORE DUROMETER A |
| MINIMUM TENSILE STRENGTH | 1500 POUNDS PER SQUARE INCH |
| ENVIRONMENTAL PROTECTION | PETROLEUM AND LOW TEMPERATURE AND OZONE RESISTANT AND WEATHER RESISTANT |
| NONDEFINITIVE SPEC/STD DATA | 2 CLASS AND EXTRUDEDSHAPE FORM AND 60 GRADE AND A TYPE |