NSN 9540-00-008-6030

Part Details | STRUCTURAL BEAM

9540-00-008-6030 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.

Alternate Parts: AND101362403, AND10136-2403, QQA20011, QQA200-11, LS1013624035, LS10136-2403-5, AMSSTD184, AMS-STD-184, AMSQQA200A, AMS-QQ-A-200A, AMSQQA20011, AMS-QQ-A-200/11, 9540-00-008-6030, 00-008-6030, 9540000086030, 000086030

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
95JUL 23, 197200-008-603037018 ( BEAM, STRUCTURAL )
REFERENCE DRAWINGS & PICTURES

T SHAPE

LOWER RADIUS

FULL RADIUS

LOWER RADIUS

FULL RADIUS

LOWER RADIUS

FULL RADIUS

LOWER RADIUS

FULL RADIUS

Cross Reference | NSN 9540-00-008-6030
Part Number Cage Code Manufacturer
AND10136-240399237AIRFORCE-NAVY AERONAUTICAL DESIGNSTANDARD
QQA200-1181348FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES
LS10136-2403-598897LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS
AMS-STD-18481343SOCIETY OF AUTOMOTIVE ENGINEERS INC
AMS-QQ-A-200A81343SOCIETY OF AUTOMOTIVE ENGINEERS INC
AMS-QQ-A-200/1181343SOCIETY OF AUTOMOTIVE ENGINEERS INC
Technical Data | NSN 9540-00-008-6030
Characteristic Specifications
FABRICATION METHOD EXTRUDED
HEAT TREATMENT T-6511 SOLUTION HEAT TREATED
LENGTH10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
BASIC SHAPE STYLE T SHAPE
OVERALL HEIGHT1.250 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS0.156 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS0.156 INCHES NOMINAL
LEG THICKNESS0.156 INCHES NOMINAL
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.250 INCHES NOMINAL
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.250 INCHES NOMINAL
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
TOP FLANGE WIDTH2.500 INCHES NOMINAL
LEFT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
RIGHT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
FIRST TIP STYLE LOWER RADIUS
FIRST TIP RADIUS0.156 INCHES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIP IDENTICAL
THIRD TIP RELATIONSHIP TO PRECEDING TIPS NOT IDENTICAL
THIRD TIP STYLE FULL RADIUS
THIRD TIP RADIUS0.078 INCHES NOMINAL
WEIGHT PER UNIT MEASURE0.660 POUNDS PER LINEAR FOOT
NONDEFINITIVE SPEC/STD DATA7075 ALLOY AND T6511 TEMPER