NSN 9540-00-148-4375

Part Details | STRUCTURAL BEAM

9540-00-148-4375 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.

Alternate Parts: 23160, E712203, BAC150518884, BAC1505-18884, QQA2003, QQ-A-200/3, E712203, E712203, 22106, 2-2106, AMSQQA2003, AMS-QQ-A-200/3, E712203, 9540-00-148-4375, 00-148-4375, 9540001484375, 001484375

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
95JAN 01, 196300-148-437537018 ( BEAM, STRUCTURAL )
REFERENCE DRAWINGS & PICTURES

T SHAPE

SQUARE END

SQUARE END

SQUARE END

SQUARE END

Cross Reference | NSN 9540-00-148-4375
Part Number Cage Code Manufacturer
2316001634ALUMINUM CO OF AMERICA
E71220363910BAE SYSTEMS INFORMATION ANDELECTRONIC SYSTEMS INTEGRATION I
BAC1505-1888482918BOEING COMPANY, THEDBA BOEING
QQ-A-200/381348FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES
E7122030WLU1GENERAL DYNAMICS CORPCONVAIR DIV
E71220314170HUGHES MISSILE SYSTEMS COSAN DIEGO
2-210638597LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN
AMS-QQ-A-200/381343SOCIETY OF AUTOMOTIVE ENGINEERS INC
E7122037B709TRACOR FLIGHT SYSTEMS INCSUB OF TRACOR INC
Technical Data | NSN 9540-00-148-4375
Characteristic Specifications
FABRICATION METHOD EXTRUDED
HEAT TREATMENT T-3511 SOLUTION HEAT TREATED
LENGTH10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
BASIC SHAPE STYLE T SHAPE
OVERALL HEIGHT1.500 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS0.064 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS0.064 INCHES NOMINAL
LEG THICKNESS0.064 INCHES NOMINAL
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES0.750 INCHES NOMINAL
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES0.750 INCHES NOMINAL
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
TOP FLANGE WIDTH1.500 INCHES NOMINAL
LEFT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
RIGHT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
FIRST TIP STYLE SQUARE END
SECOND TIP RELATIONSHIP TO FIRST TIP IDENTICAL
THIRD TIP RELATIONSHIP TO PRECEDING TIPS IDENTICAL W/FIRST TIP
WEIGHT PER UNIT MEASURE0.230 POUNDS PER LINEAR FOOT
NONDEFINITIVE SPEC/STD DATA2024 ALLOY AND T3511 TEMPER