NSN 9540-00-400-8674
Part Details | STRUCTURAL BEAM
9540-00-400-8674 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.
Alternate Parts: 81616, 81616, 1M461, QQA20013, QQ-A-200/13, AMSQQA20013, AMS-QQ-A-200/13, 605011, 60-5011, PA18735, 9540-00-400-8674, 00-400-8674, 9540004008674, 004008674
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 95 | NOV 19, 1969 | 00-400-8674 | 37018 ( BEAM, STRUCTURAL ) |
REFERENCE DRAWINGS & PICTURES
Z SHAPE
LOWER RADIUS
LOWER RADIUS
LOWER RADIUS
LOWER RADIUS
Cross Reference | NSN 9540-00-400-8674
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 81616 | 01634 | ALUMINUM CO OF AMERICA |
| 81616 | 09192 | ALUMINUM CO OF AMERICA VERNON WORKSDIV |
| 1M461 | 76301 | BOEING COMPANY, THEDBA BOEING |
| QQ-A-200/13 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
| AMS-QQ-A-200/13 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
| 60-5011 | 29321 | TRANSTAR METALS CORP |
| PA18735 | 06012 | TRANSTAR METALS CORP |
Technical Data | NSN 9540-00-400-8674
| Characteristic | Specifications |
|---|---|
| FABRICATION METHOD | EXTRUDED |
| HEAT TREATMENT | T-6511 SOLUTION HEAT TREATED |
| LENGTH | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM |
| BASIC SHAPE STYLE | 1 Z SHAPE |
| OVERALL HEIGHT | 1.000 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE THICKNESS | 0.040 INCHES NOMINAL |
| RIGHT SIDE BOTTOM FLANGE THICKNESS | 0.046 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.062 INCHES NOMINAL |
| FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.062 INCHES NOMINAL |
| WEB FLANGE THICKNESS | 0.040 INCHES NOMINAL |
| TOP FLANGE WIDTH | 0.375 INCHES NOMINAL |
| BOTTOM FLANGE WIDTH | 0.675 INCHES NOMINAL |
| LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| RIGHT BOTTOM INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| FIRST TIP STYLE | LOWER RADIUS |
| FIRST TIP RADIUS | 0.020 INCHES NOMINAL |
| SECOND TIP RELATIONSHIP TO FIRST TIP | IDENTICAL |
| WEIGHT PER UNIT MEASURE | 0.100 POUNDS PER LINEAR FOOT |
| NONDEFINITIVE SPEC/STD DATA | T6511 TEMPER |