NSN 9540-00-541-7431
Part Details | STRUCTURAL BEAM
9540-00-541-7431 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.
Alternate Parts: 19903, 27477, 190895, E711117, S82, QQA20013, QQ-A-200/13, E711117, FS5010215102, FS50102-1510-2, E711117, 60476, AMSQQA20013, AMS-QQ-A-200/13, BAC150518721, BAC1505-18721, E711117, PA6568, 604201, 60-4201, 9540-00-541-7431, 00-541-7431, 9540005417431, 005417431
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 95 | JAN 01, 1963 | 00-541-7431 | 37018 ( BEAM, STRUCTURAL ) |
REFERENCE DRAWINGS & PICTURES
T SHAPE
SQUARE END
FULL RADIUS
SQUARE END
FULL RADIUS
SQUARE END
FULL RADIUS
SQUARE END
FULL RADIUS
Cross Reference | NSN 9540-00-541-7431
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 19903 | 77783 | ALCOA/REYNOLDS METALS COMPANY |
| 27477 | 01634 | ALUMINUM CO OF AMERICA |
| 190895 | 01634 | ALUMINUM CO OF AMERICA |
| E711117 | 63910 | BAE SYSTEMS INFORMATION ANDELECTRONIC SYSTEMS INTEGRATION I |
| S82 | 71379 | CESSNA AIRCRAFT COMPANYDBA TEXTRON AVIATION |
| QQ-A-200/13 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
| E711117 | 0WLU1 | GENERAL DYNAMICS CORPCONVAIR DIV |
| FS50102-1510-2 | 89446 | HILLER AIRCRAFT CORPORATION |
| E711117 | 14170 | HUGHES MISSILE SYSTEMS COSAN DIEGO |
| 60476 | 27610 | INTERNATIONAL LIGHT METALS CORPSUB OF MARTIN MARIETTA CORP |
| AMS-QQ-A-200/13 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
| BAC1505-18721 | 81205 | THE BOEING COMPANYDBA BOEING |
| E711117 | 7B709 | TRACOR FLIGHT SYSTEMS INCSUB OF TRACOR INC |
| PA6568 | 06012 | TRANSTAR METALS CORP |
| 60-4201 | 29321 | TRANSTAR METALS CORP |
Technical Data | NSN 9540-00-541-7431
| Characteristic | Specifications |
|---|---|
| FABRICATION METHOD | EXTRUDED |
| HEAT TREATMENT | T-6 SOLUTION HEAT TREATED |
| LENGTH | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM |
| BASIC SHAPE STYLE | T SHAPE |
| OVERALL HEIGHT | 1.000 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE THICKNESS | 0.062 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE THICKNESS | 0.062 INCHES NOMINAL |
| LEG THICKNESS | 0.062 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.750 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.750 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.062 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.062 INCHES NOMINAL |
| TOP FLANGE WIDTH | 1.500 INCHES NOMINAL |
| LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| RIGHT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| FIRST TIP STYLE | FULL RADIUS |
| FIRST TIP RADIUS | 0.031 INCHES NOMINAL |
| SECOND TIP RELATIONSHIP TO FIRST TIP | IDENTICAL |
| THIRD TIP RELATIONSHIP TO PRECEDING TIPS | NOT IDENTICAL |
| THIRD TIP STYLE | SQUARE END |
| WEIGHT PER UNIT MEASURE | 0.180 POUNDS PER LINEAR FOOT |
| NONDEFINITIVE SPEC/STD DATA | T6 TEMPER |