NSN 5530-00-129-7751
Part Details | DECORATIVE PLYWOOD
5530-00-129-7751 A panel composed of an assembly of layers or plies of veneer (or veneers in combination with lumber core, particle board core, or hardboard core, or of special core material) joined with an adhesive. Except for special constructions, the grain of alternate plies is always approximately at right angles, and the face veneer is usually a hardwood species.
Alternate Parts: AA55057A, A-A-55057A, NNP530, NN-P-530, 5530-00-129-7751, 00-129-7751, 5530001297751, 001297751
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 55 | MAR 18, 1986 | 00-129-7751 | 36784 ( PLYWOOD, DECORATIVE ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 5530-00-129-7751
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| A-A-55057A | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTIONPROMULGATED BY GENERAL SERVICES |
| NN-P-530 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
Technical Data | NSN 5530-00-129-7751
| Characteristic | Specifications |
|---|---|
| TYPICAL WOOD PRODUCTS USE | EXTERIOR USE WHERE APPEARANCE OF ONLY ONE SIDE IS IMPORTANT SUCH AS SOFFETS, FENCES, STRUCTURAL USE, BOX CAR LININGS AND GABLE ENDS |
| PLYWOOD SPECIES AND GRADE | ANY ACCEPTABLE A-C EXTERIOR |
| THICKNESS-LOCATION AND MEASURING METHOD | DSD0.375 INCHES NOMINAL |
| WIDTH-LOCATION AND MEASURING METHOD | DSD48.000 INCHES NOMINAL |
| MEASURING METHOD AND LENGTH | SD120.000 INCHES NOMINAL |
| GLUE TYPE | EXTERIOR |
| SURFACE CONDITION DEGREE | REGULAR SANDED ONE SIDE |
| SPECIAL FEATURES | ITEM MAY BE SUPPLIED 1/32 IN. SCANT IN THK; IF SO,THK MUST BE SHOWN ON GRADESTAMP |
| SPECIFICATION/STANDARD DATA | 81348-NN-P-530 GOVERNMENT SPECIFICATION |
| NONDEFINITIVE SPEC/STD DATA | C GRADE |