NSN 5905-00-007-0784
Part Details | WIRE WOUND FIXED RESISTOR
5905-00-007-0784 A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self supporting. Opposition to the flow of current is an inherent property of the resistance wire and is manifest by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE.
Alternate Parts: RER60FR121R, MILR390091, MIL-R-39009/1, 417147432, 4171474-32, RH5R1210HMS1PCT, 5905-00-007-0784, 00-007-0784, 5905000070784, 000070784
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JUN 28, 1972 | 00-007-0784 | 00010 ( RESISTOR, FIXED, WIRE WOUND ) |
REFERENCE DRAWINGS & PICTURES
AXIAL TERMINAL EACH END
Cross Reference | NSN 5905-00-007-0784
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| RER60FR121R | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MIL-R-39009/1 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| 4171474-32 | 05869 | RAYTHEON COMPANYDBA RAYTHEON |
| RH5R1210HMS1PCT | 91637 | VISHAY DALE ELECTRONICS, LLCDBA VISHAY INTERTECHNOLOGY |
Technical Data | NSN 5905-00-007-0784
| Characteristic | Specifications |
|---|---|
| ELECTRICAL RESISTANCE | 0.121 OHMS |
| RESISTANCE TOLERANCE IN PERCENT | M1.000/P1.000 |
| POWER DISSIPATION RATING IN WATTS | 3.000 FREE AIR |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | M100.0/P100.0 |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | M55.0/P275.0 |
| INCLOSURE METHOD | ENCASED |
| STYLE DESIGNATOR | 48 AXIAL TERMINAL EACH END |
| BODY LENGTH | 0.538 INCHES MINIMUM AND 0.662 INCHES MAXIMUM |
| BODY WIDTH | 0.272 INCHES MINIMUM AND 0.396 INCHES MAXIMUM |
| BODY HEIGHT | 0.289 INCHES MINIMUM AND 0.351 INCHES MAXIMUM |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 0.434 INCHES MINIMUM AND 0.454 INCHES MAXIMUM |
| MOUNTING HOLE SIZE | 0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| TERMINAL TYPE | TAB, SOLDER LUG |
| RELIABILITY INDICATOR | ESTABLISHED |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| TERMINAL LENGTH | 0.204 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| TERMINAL WIDTH | 0.085 INCHES MINIMUM |
| CUBIC MEASURE | 0.064 CUBIC INCHES |
| TEST DATA DOCUMENT | 81349-MIL-R-39009 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-R-39009 TO 1 GOVERNMENT SPECIFICATION |