NSN 5910-00-034-1846
Part Details | MICA DIELECTRIC FIXED CAPACITOR
5910-00-034-1846 A capacitor, whose capacitance value cannot be adjusted or varied, having natural sheet mica or reconstituted flaked mica formed into sheets as the dielectric material. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Alternate Parts: 01400166, 0140-0166, RDM30F173G3S, DM30F173G0300WV1CR, 01400166, 0140-0166, 01400166, 0140-0166, 01400166, 0140-0166, HP30173G301, 5910-00-034-1846, 00-034-1846, 5910000341846, 000341846
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JAN 01, 1961 | 00-034-1846 | 00005 ( CAPACITOR, FIXED, MICA DIELECTRIC ) |
REFERENCE DRAWINGS & PICTURES
W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
NO COMMON OR GROUNDED ELECTRODE(S)
Cross Reference | NSN 5910-00-034-1846
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 0140-0166 | 93790 | CORNELL-DUBILIER ELECTRONICS |
| RDM30F173G3S | 72136 | ELECTRO MOTIVE CORP SUBSIDIARY OFINTERNATIONAL ELECTRONICS CORP |
| DM30F173G0300WV1CR | 72136 | ELECTRO MOTIVE CORP SUBSIDIARY OFINTERNATIONAL ELECTRONICS CORP |
| 0140-0166 | 16141 | GOUDY AND STEVENS |
| 0140-0166 | 28480 | HEWLETT-PACKARD COMPANYDBA HP |
| 0140-0166 | 1LQK8 | KEYSIGHT TECHNOLOGIES, INC. |
| HP30173G301 | 57582 | SUSCO ELECTRONICS INC |
Technical Data | NSN 5910-00-034-1846
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 0.017 MICROFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -2.00 TO +2.00 PERCENT SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 300.0 DC SINGLE SECTION |
| TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS | +0.0 TO +70.0 SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| BODY LENGTH | 0.800 INCHES MAXIMUM |
| BODY WIDTH | 0.890 INCHES MAXIMUM |
| BODY HEIGHT | 0.360 INCHES MAXIMUM |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TERMINAL LENGTH | 1.250 INCHES MINIMUM |
| TERMINAL DIAMETER | 0.040 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.438 INCHES NOMINAL |
| CASE MATERIAL | PLASTIC |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TERMINAL SURFACE TREATMENT | SOLDER |