NSN 5915-00-155-1425
Part Details | RADIO FREQUENCY INTERFERENCE FILTER
5915-00-155-1425 An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
Alternate Parts: 0N176576, 5915-00-155-1425, 00-155-1425, 5915001551425, 001551425
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | OCT 10, 1971 | 00-155-1425 | 00765 ( FILTER, RADIO FREQUENCY INTERFERENCE ) |
REFERENCE DRAWINGS & PICTURES
ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES
Cross Reference | NSN 5915-00-155-1425
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 0N176576 | 98230 | NATIONAL SECURITY AGENCY |
Technical Data | NSN 5915-00-155-1425
| Characteristic | Specifications |
|---|---|
| OPERATING VOLTAGE RATING AND TYPE PER FUNCTION | CZZ80.0 VOLTS |
| OPERATING CURRENT RATING PER FUNCTION IN AMPS | 10.0 BLANK |
| INCLOSURE TYPE | ENCASED |
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | B1 TAB, SOLDER LUG AND F1 TAB, SOLDER LUG |
| STYLE DESIGNATOR | ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES |
| OVERALL LENGTH | 0.685 INCHES NOMINAL |
| BODY LENGTH | 0.170 INCHES NOMINAL |
| BODY OUTSIDE DIAMETER | 0.375 INCHES NOMINAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED BUSHING |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| SPECIAL FEATURES | SELECTED ITEM; LOCKWASHER AND HEX NUT PROVIDED |
| TEST DATA DOCUMENT | 81349-MIL-F-15733 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 98230-ON176576 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| END ITEM IDENTIFICATION | KGP-29A/CJV |