NSN 5920-00-417-4624
Part Details | BLOCK FUSEHOLDER
5920-00-417-4624 A fuseholder in which the fuseholder stud and/or clips and insulation are mounted on a flat base. Excludes FUSEHOLDER, RECEPTACLE.
Alternate Parts: H250301CR, H25030-1CR, AA55168006, AA55168-006, AA5168006, AA5168-006, AA55168, A-A-55168, LH250301CR, LH25030-1CR, H250301C, H25030-1C, H250301CR, H25030-1CR, 5920-00-417-4624, 00-417-4624, 5920004174624, 004174624
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | MAY 01, 1974 | 00-417-4624 | 28908 ( FUSEHOLDER, BLOCK ) |
REFERENCE DRAWINGS & PICTURES
CLIP CONNECTED TYPE
ONE HOLE MOUNTING
Cross Reference | NSN 5920-00-417-4624
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| H25030-1CR | 71400 | COOPER BUSSMANN, LLCDBA COOPER BUSSMANN |
| AA55168-006 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTIONPROMULGATED BY GENERAL SERVICES |
| AA5168-006 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTIONPROMULGATED BY GENERAL SERVICES |
| A-A-55168 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTIONPROMULGATED BY GENERAL SERVICES |
| LH25030-1CR | 75915 | LITTELFUSE, INC. |
| H25030-1C | 11873 | MCGRAW EDISON COUSD OPNS |
| H25030-1CR | 04725 | REPUBLIC ELECTRIC AND DEVELOPMENT CO |
Technical Data | NSN 5920-00-417-4624
| Characteristic | Specifications |
|---|---|
| FUSE ACCOMMODATION QUANTITY | 1 |
| CURRENT CARRYING RATING IN AMPS | 30.0 |
| VOLTAGE IN VOLTS | 250.0 |
| FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG |
| CONTACT MATERIAL | BRONZE, SPRING |
| CONTACT SURFACE TREATMENT | ANY ACCEPTABLE |
| BODY STYLE | CLIP CONNECTED TYPE |
| OVERALL LENGTH | 3.031 INCHES NOMINAL |
| OVERALL HEIGHT | 1.375 INCHES NOMINAL |
| OVERALL WIDTH | 1.250 INCHES NOMINAL |
| BASE THICKNESS | 0.219 INCHES NOMINAL |
| MOUNTING HOLE STYLE | 1 ONE HOLE MOUNTING |
| CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH | 0.750 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH | 0.500 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN INSIDE MOUNTING HOLES ALONG LENGTH | 0.375 INCHES NOMINAL |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING HOLE DIAMETER | 0.219 INCHES NOMINAL |
| ACCOMMODATED FUSE LENGTH | 1.500 INCHES NOMINAL |
| ACCOMMODATED FERRULE DIAMETER | 0.406 INCHES NOMINAL |
| INTERNAL CIRCUIT CONFIGURATION AND POLE QUANTITY | 1 POLE, MAINLINE, FUSED |
| BODY MATERIAL | PLASTIC, PHENOLIC, MOULDED |