NSN 5930-00-138-7488
Part Details | THERMOSTATIC SWITCH
5930-00-138-7488 A switch that is actuated by changes in ambient temperature. Excludes CIRCUIT BREAKER; CONTROL, TEMPERATURE (as modified); FUSE (as modified); PROTECTOR, THERMAL-OVERLOAD, ELECTRICAL MOTOR; RELAY, THERMAL; and THERMOSTAT, FLOW CONTROL. See also CONTROL, TEMPERATURE (as modified) and REGULATOR, TEMPERATURE (as modified).
Alternate Parts: SE5300109, SE5300-109, S1048, S-10-48, K8030115V0LTS, K8030-115V0LTS, 5930-00-138-7488, 00-138-7488, 5930001387488, 001387488
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JUL 30, 1971 | 00-138-7488 | 00451 ( SWITCH, THERMOSTATIC ) |
REFERENCE DRAWINGS & PICTURES
RECTANGULAR
Cross Reference | NSN 5930-00-138-7488
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| SE5300-109 | 77857 | ROBERTSHAW CONTROLS CONEW STANTON DIV |
| S-10-48 | 77857 | ROBERTSHAW CONTROLS CONEW STANTON DIV |
| K8030-115V0LTS | 77857 | ROBERTSHAW CONTROLS CONEW STANTON DIV |
Technical Data | NSN 5930-00-138-7488
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | 2 RECTANGULAR |
| OVERALL LENGTH | 1.656 INCHES NOMINAL |
| OVERALL HEIGHT | 2.953 INCHES NOMINAL |
| OVERALL WIDTH | 2.359 INCHES NOMINAL |
| BODY LENGTH | 1.656 INCHES NOMINAL |
| NONPILE-UP CONTACT ARRANGEMENT | 1 POLE, SINGLE THROW, NORMALLY CLOSED, MOMENTARY ACTION |
| CONTACT ACTION STIMULUS | INCREASE |
| CONTACT ADJUSTABILITY | DEACTUATION POINT ADJUSTABLE AND ACTUATION POINT ADJUSTABLE |
| CONTACT ADJUSTMENT RANGE | +175.00 TO +460.00 ACTUATION POINT DEGREES FAHRENHEIT AND +175.00 TO +460.00 DEACTUATION POINT DEGREES FAHRENHEIT |
| CONTACT ADJUSTMENT TYPE | EXTERNAL DEACTUATION POINT SHAFT WITH SCALE AND EXTERNAL ACTUATION POINT SHAFT WITH SCALE |
| MEDIA FOR WHICH DESIGNED | Q$DADF |
| TEMP SENSING ELEMENT TYPE | CAPILLARY TUBE-BULB |
| CAPILLARY TUBE LENGTH | 48.000 INCHES NOMINAL |
| BULB LENGTH | 11.875 INCHES NOMINAL |
| BULB DIAMETER | 0.188 INCHES NOMINAL |
| TERMINAL TYPE | TAB W/SCREW |
| MOUNTING METHOD | BASE AND THREADED HOLE |
| MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 1.750 INCHES NOMINAL |