NSN 5930-01-199-7181
Part Details | THERMOSTATIC SWITCH
5930-01-199-7181 A switch that is actuated by changes in ambient temperature. Excludes CIRCUIT BREAKER; CONTROL, TEMPERATURE (as modified); FUSE (as modified); PROTECTOR, THERMAL-OVERLOAD, ELECTRICAL MOTOR; RELAY, THERMAL; and THERMOSTAT, FLOW CONTROL. See also CONTROL, TEMPERATURE (as modified) and REGULATOR, TEMPERATURE (as modified).
Alternate Parts: M2423620QCKA, M24236/20-QCKA, MILS2423620, MIL-S-24236/20, MILPRF2423620, MIL-PRF-24236/20, 5930-01-199-7181, 01-199-7181, 5930011997181, 011997181
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JAN 25, 1985 | 01-199-7181 | 00451 ( SWITCH, THERMOSTATIC ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 5930-01-199-7181
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| M24236/20-QCKA | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MIL-S-24236/20 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MIL-PRF-24236/20 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 5930-01-199-7181
| Characteristic | Specifications |
|---|---|
| OVERALL LENGTH | 1.465 INCHES MINIMUM AND 1.510 INCHES MAXIMUM |
| BODY DIAMETER | 0.720 INCHES MAXIMUM |
| BODY HEIGHT | 0.360 INCHES MAXIMUM |
| NONPILE-UP CONTACT ARRANGEMENT | 1 POLE, SINGLE THROW, BOTH POSITIONS MAINTAINED |
| CONTACT ACTION STIMULUS | INCREASE |
| CONTACT ADJUSTABILITY | ACTUATION POINT NOT ADJUSTABLE AND DEACTUATION POINT NOT ADJUSTABLE |
| CONTACT STIMULUS RATING | AF56.00 ACTUATION POINT MINIMUM AND AF64.00 ACTUATION POINT MAXIMUM AND AF2.00 DIFFERENTIAL POINT MINIMUM AND AF4.00 DIFFERENTIAL POINT MAXIMUM |
| OPERATING TEMP RATING | -10.0 DEG FAHRENHEIT MINIMUM AND 250.0 DEG FAHRENHEIT MAXIMUM |
| MEDIA FOR WHICH DESIGNED | SOLID |
| TEMP SENSING ELEMENT TYPE | INTERNAL SENSOR |
| TERMINAL TYPE | TAB, SOLDER LUG |
| MOUNTING METHOD | BRACKET AND SLOT |
| MOUNTING SLOT WIDTH | 0.104 INCHES NOMINAL |
| MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 0.930 INCHES MINIMUM AND 1.016 INCHES MAXIMUM |
| FEATURES PROVIDED | HERMETICALLY SEALED CASE |
| TEST DATA DOCUMENT | 81349-MIL-S-24236 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL--24236 TO 20 GOVERNMENT SPECIFICATION |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND EXPLOSION PROOF AND VIBRATION RESISTANT AND WATERTIGHT |
| END ITEM IDENTIFICATION | 5895-01-121-9558,COMMUNICATIONS TERM |