NSN 5930-01-289-7346
Part Details | DUST AND MOISTURE SEAL BOOT
5930-01-289-7346 A flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
Alternate Parts: 77C730131P001, 77C730131P001, 77C730131, 77C730131P001, 5930-01-289-7346, 01-289-7346, 5930012897346, 012897346
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | NOV 29, 1988 | 01-289-7346 | 19302 ( BOOT, DUST AND MOISTURE SEAL ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 5930-01-289-7346
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 77C730131P001 | 97705 | AXIL CORPORATIONDBA ITRAN RUBBER |
| 77C730131P001 | 03538 | LOCKHEED MARTIN CORPORATIONDIV RMS |
| 77C730131 | 03538 | LOCKHEED MARTIN CORPORATIONDIV RMS |
| 77C730131P001 | 76376 | MECHANICAL RUBBER PRODUCTS COMPANYINC |
Technical Data | NSN 5930-01-289-7346
| Characteristic | Specifications |
|---|---|
| RADIUS | 0.020 INCHES MAXIMUM |
| OVERALL LENGTH | 4.970 INCHES MINIMUM AND 5.030 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 4.470 INCHES MINIMUM AND 4.530 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM |
| OVERALL HEIGHT | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
| OVERALL WIDTH | 1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM |
| MATERIAL THICKNESS | 0.020 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| MOUNTING HOLE DIAMETER | 0.201 INCHES MINIMUM AND 0.209 INCHES MAXIMUM |
| BASE OVERALL LENGTH | 4.090 INCHES MINIMUM AND 4.150 INCHES MAXIMUM |
| FIRST DISTANCE FROM MOUNTING HOLE CENTER TO BASE EDGE | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| DISTANCE FROM INSIDE OPENING TO BASE EDGE | 0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| SECOND DISTANCE FROM MOUNTING HOLE CENTER TO BASE EDGE | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| MOUNTING METHOD | FLANGE AND UNTHREADED HOLE |
| SPECIAL FEATURES | CLOSED END; WEAPON SYSTEM ESSENTIAL |
| CRITICALITY CODE JUSTIFICATION | FEAT |
| END ITEM IDENTIFICATION | ARLEIGH BURKE CLASS DDG, SPRUANCE CLASS DD (963), AN/SQQ-89 SURFACE SHIPASW COMBAT SYSTEM, TICONDEROGA CLASS CG (47) |