NSN 5990-00-724-3087

Part Details | CONTROL TRANSFORMER SYNCHRO

5990-00-724-3087 A synchro consisting of a stator and rotor inductively coupled. The electrical output of the rotor is dependent upon both the position of the rotor and the electrical input to the stator from a transmitter synchro or a differential synchro. Does not include variable resistors, goniometers, or variable transformers.

Alternate Parts: 5RS9003E, 5RS900-3E, 12317244, 123-17-244, 77C716473P002, 7RS9003E, 7RS900-3E, 5990-00-724-3087, 00-724-3087, 5990007243087, 007243087

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
59JAN 01, 196100-724-308715289 ( SYNCHRO, CONTROL TRANSFORMER )
REFERENCE DRAWINGS & PICTURES

STANDARD ROUND C

Cross Reference | NSN 5990-00-724-3087
Part Number Cage Code Manufacturer
5RS900-3E88818KEARFOTT CORPORATIONDBA KEARFOTT
123-17-24488818KEARFOTT CORPORATIONDBA KEARFOTT
77C716473P00203538LOCKHEED MARTIN CORPORATIONDIV RMS
7RS900-3E14804SINGER CO THEKEARFOTT DIV
Technical Data | NSN 5990-00-724-3087
Characteristic Specifications
BODY SIZE11
STATOR INPUT VOLTAGE RATING IN VOLTS11.8 NOMINAL
STATOR INPUT CURRENT RATING21.0 MILLIAMPERES NOMINAL
STATOR INPUT ELECTRICAL POWER RATING30.0 MILLIWATTS NOMINAL
FREQUENCY IN HERTZ400.0 NOMINAL
ZRO IMPEDANCE MAGNITUDE IN OHMS3340.00 NOMINAL
ZRO IMPEDANCE ANGLE IN DEG79.20 NOMINAL
ZSO IMPEDANCE MAGNITUDE IN OHMS577.00 NOMINAL
ZSO IMPEDANCE ANGLE IN DEG80.70 NOMINAL
ZRS IMPEDANCE MAGNITUDE IN OHMS659.00 NOMINAL
ZRS IMPEDANCE ANGLE IN DEG30.10 NOMINAL
TRANSFORMATION RATIO2.203 ROTOR TO STATOR NOMINAL
PHASE SHIFT ANGLE IN DEG4.200 INPUT TO OUTPUT NOMINAL
ELECTRICAL ERROR ANGULAR RANGE IN MINUTESM5.0/P5.0
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS16.0 CENTIMETER-GRAMS NOMINAL
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS4.0 CENTIMETER-GRAMS NOMINAL
BODY STYLE STANDARD ROUND C
SHOULDER DIAMETER0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM
PILOT DIAMETER0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
OVERALL LENGTH2.4890 INCHES MINIMUM AND 2.5130 INCHES MAXIMUM
FLANGE DIAMETER1.0570 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM
FLANGE THICKNESS0.0930 INCHES NOMINAL
UNDERCUT DIAMETER0.9750 INCHES NOMINAL
UNDERCUT WIDTH0.0500 INCHES NOMINAL
PILOT LENGTH0.0620 INCHES NOMINAL
SHOULDER LENGTH0.0620 INCHES NOMINAL
MOUNTING SURFACE TO TERMINAL END DISTANCE1.7960 INCHES MAXIMUM
TERMINAL TYPE AND QUANTITY5 TAB, SOLDER LUG
TERMINAL LOCATION REAR
BODY MATERIAL STEEL, STAINLESS