NSN 9540-00-179-9593
Part Details | STRUCTURAL BEAM
9540-00-179-9593 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.
Alternate Parts: LS5137, QQA20011, QQA200-11, AMSQQA20011, AMS-QQ-A-200/11, 606906, 60-6906, 9540-00-179-9593, 00-179-9593, 9540001799593, 001799593
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 95 | DEC 17, 1971 | 00-179-9593 | 37018 ( BEAM, STRUCTURAL ) |
REFERENCE DRAWINGS & PICTURES
SQUARE W/ INNER AND OUTER CORNER RADII
SQUARE W/ INNER AND OUTER CORNER RADII
SQUARE W/ INNER AND OUTER CORNER RADII
SQUARE W/ INNER AND OUTER CORNER RADII
Cross Reference | NSN 9540-00-179-9593
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| LS5137 | 98897 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS |
| QQA200-11 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| AMS-QQ-A-200/11 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
| 60-6906 | 29321 | TRANSTAR METALS CORP |
Technical Data | NSN 9540-00-179-9593
| Characteristic | Specifications |
|---|---|
| FABRICATION METHOD | EXTRUDED |
| HEAT TREATMENT | K$DRL |
| LENGTH | 11.250 FEET NOMINAL |
| OVERALL HEIGHT | 2.060 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE THICKNESS | 0.200 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE THICKNESS | 0.200 INCHES NOMINAL |
| LEG THICKNESS | 0.150 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 1.325 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 1.175 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.120 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.120 INCHES NOMINAL |
| TOP FLANGE WIDTH | 2.500 INCHES NOMINAL |
| LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| RIGHT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| FIRST TIP STYLE | SQUARE W/ INNER AND OUTER CORNER RADII |
| FIRST TIP INNER RADIUS | 0.032 INCHES NOMINAL |
| FIRST TIP OUTER RADIUS | 0.032 INCHES NOMINAL |
| SECOND TIP RELATIONSHIP TO FIRST TIP | IDENTICAL |
| WEIGHT PER UNIT MEASURE | 1.160 POUNDS PER LINEAR FOOT |
| SPECIAL FEATURES | FLANGE AT BOTTOM OF TEE 0.750 IN. LONG, 0.300 IN. THICK, AT A 90 DEGREE ANGLE WITH A 0.120 IN. RADIUS |
| NONDEFINITIVE SPEC/STD DATA | 7075 ALLOY AND T6$JT6511 TEMPER |