NSN 9540-00-188-4152

Part Details | STRUCTURAL BEAM

9540-00-188-4152 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.

Alternate Parts: AND101361603, AND10136-1603, 31457, QQA20011, QQA200-11, FS501031811, FS50103-1811, 15486, HT1, AMSQQA20011, AMS-QQ-A-200/11, 9540-00-188-4152, 00-188-4152, 9540001884152, 001884152

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
95JAN 01, 196300-188-415237018 ( BEAM, STRUCTURAL )
REFERENCE DRAWINGS & PICTURES

T SHAPE

LOWER RADIUS

FULL RADIUS

LOWER RADIUS

FULL RADIUS

LOWER RADIUS

FULL RADIUS

LOWER RADIUS

FULL RADIUS

Cross Reference | NSN 9540-00-188-4152
Part Number Cage Code Manufacturer
AND10136-160399237AIRFORCE-NAVY AERONAUTICAL DESIGNSTANDARD
3145799267BOHN ALUMINUM AND BRASS CODIV OF GULF AND WESTERN MFG CO
QQA200-1181348FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES
FS50103-181189446HILLER AIRCRAFT CORPORATION
1548627610INTERNATIONAL LIGHT METALS CORPSUB OF MARTIN MARIETTA CORP
HT110383KAISER ALUMINUM AND CHEMICAL CORPTRENTWOOD WORKS-MARKETING DEPT
AMS-QQ-A-200/1181343SOCIETY OF AUTOMOTIVE ENGINEERS INC
Technical Data | NSN 9540-00-188-4152
Characteristic Specifications
FABRICATION METHOD EXTRUDED
HEAT TREATMENT T-6 SOLUTION HEAT TREATED
LENGTH10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
BASIC SHAPE STYLE T SHAPE
OVERALL HEIGHT1.125 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS0.094 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS0.094 INCHES NOMINAL
LEG THICKNESS0.094 INCHES NOMINAL
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES0.875 INCHES NOMINAL
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES0.875 INCHES NOMINAL
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
TOP FLANGE WIDTH1.750 INCHES NOMINAL
LEFT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
RIGHT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
FIRST TIP STYLE LOWER RADIUS
FIRST TIP RADIUS0.094 INCHES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIP IDENTICAL
THIRD TIP RELATIONSHIP TO PRECEDING TIPS NOT IDENTICAL
THIRD TIP STYLE FULL RADIUS
THIRD TIP RADIUS0.047 INCHES NOMINAL
WEIGHT PER UNIT MEASURE0.315 POUNDS PER LINEAR FOOT
NONDEFINITIVE SPEC/STD DATA7075 ALLOY AND T6 TEMPER