NSN 9540-00-222-0461
Part Details | STRUCTURAL BEAM
9540-00-222-0461 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.
Alternate Parts: 853D, QQA2008, QQA200-8, AMSQQA2008, AMS-QQA200-8, 9540-00-222-0461, 00-222-0461, 9540002220461, 002220461
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 95 | JAN 01, 1963 | 00-222-0461 | 37018 ( BEAM, STRUCTURAL ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 9540-00-222-0461
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 853D | 01634 | ALUMINUM CO OF AMERICA |
| QQA200-8 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
| AMS-QQA200-8 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
Technical Data | NSN 9540-00-222-0461
| Characteristic | Specifications |
|---|---|
| MATERIAL | 1$2 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200 TO 8 FED SPEC 1ST MATERIAL RESPONSE |
| FABRICATION METHOD | EXTRUDED |
| HEAT TREATMENT | T-6 SOLUTION HEAT TREATED |
| LENGTH | 20.000 FEET MINIMUM AND 30.000 FEET MAXIMUM |
| OVERALL HEIGHT | 3.000 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE THICKNESS | 0.438 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE THICKNESS | 0.438 INCHES NOMINAL |
| LEG THICKNESS | 0.375 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 1.500 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 1.500 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.312 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.312 INCHES NOMINAL |
| TOP FLANGE WIDTH | 3.000 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE TIP THICKNESS | 0.375 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE TIP THICKNESS | 0.375 INCHES NOMINAL |
| LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| RIGHT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| WEIGHT PER UNIT MEASURE | 2.800 POUNDS PER LINEAR FOOT |
| NONDEFINITIVE SPEC/STD DATA | T6 TEMPER |