NSN 9540-00-288-3686
Part Details | STRUCTURAL BEAM
9540-00-288-3686 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.
Alternate Parts: 39891, QQA20011, QQ-A-200/11, 120078, AMSSTD184, AMS-STD-184, AMSQQA20011 ALLOY 7075 TMPR, AMS-QQ-A-200/11 ALLOY 7075 TMPR, AMSQQA20011, AMS-QQ-A-200/11, PA12597, 9540-00-288-3686, 00-288-3686, 9540002883686, 002883686
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 95 | JAN 01, 1963 | 00-288-3686 | 37018 ( BEAM, STRUCTURAL ) |
REFERENCE DRAWINGS & PICTURES
I SHAPE
SQUARE END
SQUARE END
SQUARE END
SQUARE END
Cross Reference | NSN 9540-00-288-3686
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 39891 | 01634 | ALUMINUM CO OF AMERICA |
| QQ-A-200/11 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
| 120078 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATIONDIV MISSION SYSTEMS |
| AMS-STD-184 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
| AMS-QQ-A-200/11 ALLOY 7075 TMPR | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
| AMS-QQ-A-200/11 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
| PA12597 | 06012 | TRANSTAR METALS CORP |
Technical Data | NSN 9540-00-288-3686
| Characteristic | Specifications |
|---|---|
| FABRICATION METHOD | EXTRUDED |
| HEAT TREATMENT | T-6 SOLUTION HEAT TREATED |
| LENGTH | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM |
| BASIC SHAPE STYLE | I SHAPE |
| OVERALL HEIGHT | 3.531 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE THICKNESS | 0.091 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE THICKNESS | 0.091 INCHES NOMINAL |
| RIGHT SIDE BOTTOM FLANGE THICKNESS | 0.125 INCHES NOMINAL |
| LEFT SIDE BOTTOM FLANGE THICKNESS | 0.125 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 1.246 INCHES NOMINAL |
| LEFT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 1.246 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 1.254 INCHES NOMINAL |
| RIGHT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 1.254 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL |
| FILLET RADIUS WHERE BOTTOM LEFT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL |
| FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.125 INCHES NOMINAL |
| WEB FLANGE THICKNESS | 0.102 INCHES NOMINAL |
| TOP FLANGE WIDTH | 2.500 INCHES NOMINAL |
| BOTTOM FLANGE WIDTH | 2.500 INCHES NOMINAL |
| LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| LEFT BOTTOM INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| RIGHT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| RIGHT BOTTOM INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| FIRST TIP STYLE | SQUARE END |
| SECOND TIP RELATIONSHIP TO FIRST TIP | IDENTICAL |
| THIRD TIP RELATIONSHIP TO PRECEDING TIPS | IDENTICAL W/FIRST TIP |
| FOURTH TIP RELATIONSHIP TO PRECEDING TIPS | IDENTICAL W/FIRST TIP |
| WEIGHT PER UNIT MEASURE | 1.068 POUNDS PER LINEAR FOOT |
| NONDEFINITIVE SPEC/STD DATA | T-6 TEMPER |